Table of Contents
Advertisement
2. Press the up/down arrow buttons until
REDIAL is displayed.
3. Press the OK button.
Receiving an incoming call
Accepting an incoming call
Incoming calls can be accepted by
pressing the seek down button, or by
pressing the OK button.
Rejecting an incoming call
Incoming calls can be rejected by:
•
pressing the seek up button, or
•
pressing the arrow down button to
highlight REJECT and then pressing
the OK button.
Receiving a second incoming
call
Note: The second incoming call function
must be activated in your phone.
If there is an incoming call whilst there is
an ongoing call, a beep will be heard and
you will have the option to end the active
call and to accept the incoming call.
Accepting a second incoming call
Note: The first incoming call will be
disconnected and replaced by the
second incoming call.
Second incoming calls can be accepted
by pressing the seek down button on the
steering wheel or on the audio unit, or by
pressing the OK button on the audio unit.
Rejecting a second incoming call
Second incoming calls can be rejected
by:
•
pressing the seek up button, or
•
pressing the arrow down button to
highlight REJECT and then pressing
the OK button.
Telephone
Second incoming calls can be rejected by
pressing function button 4.
Muting the microphone
Note: During a call, it is possible to mute
the microphone. Whilst muted,
confirmation will appear in the display.
Press function button 1. Press the button
once again to turn this function off.
Changing the active phone
Note: Phones must be bonded to the
system before they can be made active.
Note: After bonding a phone to the
system, this becomes the active phone.
1. Press the PHONE button.
2. Press the up/down buttons until
SELECT PHONE is shown.
3. Press the OK button.
4. Scroll through the different stored
phones by using the up/down buttons
to display the bonded phones.
5. Press the OK button to select the
phone which is to be the active phone.
Debonding a bonded phone
A bonded phone can be deleted from the
system at any time, unless a phone call is
in progress.
1. Press the PHONE button.
2. Press the up/down buttons until
SELECT PHONE is shown.
3. Press the OK button.
4. Press the up/down buttons to
highlight the required phone.
5. Press function button 1.
244
Advertisement
Table of Contents
