Table of Contents
Advertisement
When in use, the rear seat belts should
be placed in the belt guides on the
outboard seatbacks.
Second row centre seat belt
3
E129522
The retractor for the rear centre seat belt
is located in the roof.
To fasten the seat belt:
1. Pull the belt out steadily. It may lock if
you pull it sharply or if the vehicle is on
a slope.
2. Insert the smaller tongue into the black
buckle to the left of the centre seat.
3. Pull the larger tongue across the lap
and insert it into the buckle to the right
of the centre seat.
Note: If in constant use, you can leave
the belt buckled in the black buckle. When
it is not in use, or when you fold or move
the rear seats, you should release the belt
from the black buckle.
Occupant protection
1
2
30
E129523
Press the red button on the right buckle
to release the belt. Let it retract.
Press the button on the side of the black
buckle to release the belt. Let it retract
completely and smoothly to the retractor
in the roof.
Stow the larger tongue flat against the
roof trim.
Advertisement
Table of Contents
