Table of Contents
Advertisement
Driving with a trailer
WARNING
If any of the conditions below
cannot be met, do not use the tow
bar and have it checked by a
properly trained technician.
Before starting your journey, make sure
that the tow ball arm is properly locked.
Check that:
•
there is no warning tone when the
locking procedure has been
completed
•
the handwheel is in its housing and
that there is no gap
•
you have locked the handwheel
(anti-clockwise) and removed the key
•
the tow ball arm is locked. It must not
move when jerked.
Maintenance
CAUTIONS
The towing hitch and control unit are
maintenance-free. Do not grease or
oil them.
Only the manufacturer should carry
out repairs or dismantle the towing
hitch.
When cleaning the vehicle with a
steam jet do not direct the high
pressure jet directly onto the swivel
joint of the tow ball arm.
Towing
173
Advertisement
Table of Contents
