Auto Continue; Job Securing Time - Canon imageRunner 5075 Manual

Auto Continue

On, Off *
This setting enables you to automatically clear an error and continue printing
when an error occurs (Error skip).
If [On] is selected, error skips are performed automatically.
If [Off] is selected, you must perform error skips from the touch panel display.
NOTE
To perform an error skip, press [Print Status] on the System Monitor screen
select the job containing the error
Error skip only temporarily clears an error, so the data may not print correctly.
For information on types of errors that can be temporarily cleared with Auto
Continue, see "When a Message Is Displayed," on p. 6-3.
This setting is valid even if multiple errors have occurred.

Job Securing Time

1 hour * , 2 hours, 3 hours, 6 hours, 12 hours, and 24 hours
When a secured print job is sent to the machine, it is stored on the machine's hard
disk, and a password must be entered before the job can be printed. This setting
specifies how long the job will be stored before it is automatically canceled.
NOTE
Even if the time period specified with this setting has not elapsed, the print job data
is deleted if the main power to the machine is switched OFF.
The password is set from the printer driver.
press [Details] [Error Skip].
Settings Menu
3
3-21