Face Up/Down; Personality - Canon imageRunner 5075 Manual

Face Up/Down

3

Personality

3-42
Settings Menu
Face Down * , Face Up
This setting enables you to specify in which direction the printing surface is output
onto the output tray.
If [Face Down] is selected, the printing surface (the front when 2-sided printing) is
output downward.
If [Face Up] is selected, the printing surface (the front when 2-sided printing) is
output upward.
When printing multiple page documents:
NOTE
You cannot use [Face Up] in combination with 'Punch', 'Z-Fold', 'Staple', 'Booklet',
'Saddle Stitch', and 'Transparency Interleaving'.
Auto * , PS, PCL, Imaging, and PDF1.5
This setting enables the machine to process data received from the host
computer in the specified data format. Setting the 'Personality' to [Auto] makes the
machine determine the type of data received from the host on a job-by-job basis.
If you are printing from applications on a computer, we recommend that you use
the [Auto] setting.
NOTE
If you find that the machine does not correctly switch to the appropriate personality
when 'Personality' is set to [Auto], change the setting manually to match the data
you are sending from the host computer.
This function is not available when printing in the UFR II mode.
Face Down Face Up