Auto Continue
2
Job Securing Time
2-16
Settings Menu
On, Off
*
This setting enables you to automatically clear an error and continue printing
(Error skip) when an error occurs.
If [On] is selected, error skips are performed automatically.
If [Off] is selected, you must perform error skips from the touch panel display.
NOTE
To perform an error skip, press [Print] on the System Monitor screen © select the
•
job containing the error © press [Details] © [Error Skip].
•
Error skip only temporarily clears an error, so the data may not print correctly.
•
For information on types of errors that can be temporarily cleared with Auto
Continue, see "When a Message Is Displayed," on p. 4-3.
•
This setting is valid even if multiple errors have occurred.
1 hour
*
, 2 hours, 3 hours, 6 hours, 12 hours, and 24 hours
When a secured print job is sent to the machine, it is stored on the machine's hard
disk, and a password must be entered before the job can be printed. This setting
specifies how long the job will be stored before it is automatically canceled.
NOTE
•
Even if the time period specified with this setting has not elapsed, the print job data
is deleted if the main power to the machine is switched OFF.
•
The password is set from the printer driver.