Canon imageRunner 5075 Manual page 177

PDL PDF Output Sel. Err
Cause An error occurred in the PDF data output mode.
Remedy 1 After canceling the print job, try printing again with PDF data that is compatible
with the machine.
Remedy 2 Perform [Error Skip] and continue printing. However, the data will not be printed
correctly.
NOTE
If 'Auto Continue' is set to [On], this error is skipped automatically. (See "Auto Continue,"
on p. 3-21.)
PDL PDF Page Comp. Error
Cause There was compressed data in the PDF page that cannot be processed by the
machine.
Remedy 1 After canceling the print job, try printing again with PDF data that is compatible
with the machine.
Remedy 2 Perform [Error Skip] and continue printing. However, the data will not be printed
correctly.
NOTE
If 'Auto Continue' is set to [On], this error is skipped automatically. (See "Auto Continue,"
on p. 3-21.)
PDL PDF Print Range Err
Cause The range of the specified print pages is incorrect.
Remedy After canceling the print job, try printing again with PDF data that is compatible
with the machine.
When a Message Is Displayed
Error Skip
Error Skip
6
6-9