Attaching The Hose; Using The Tool - Hoover SteamVac Agility F6211 Manual

Attach the hose
Unplug deep cleaner from electrical outlet.
Place handle in upright position.
The hose and tool caddy can be removed from the
cleaner if you desire.
Remove hose from tool caddy.
Open hose door (A) on back of deep cleaner (Fig. 13).
Align hose connector with hose and solution ports (C)
(Fig. 14).
Push hose into port and lock in place.
To remove hose: Squeeze latches (D) on top and bottom
of hose. Remove hose from port (Fig. 15).
Close hose door (A) tightly (inset).
Stair/upholstery nozzle
16
• Built-in brush
• Use on upholstery
Attach tool
Unplug deep cleaner from electrical outlet.
Slide tool onto hose. Snap tool over tab (E) on hose (Fig 17).
To remove tool: Push forward and up on latch (F) (Fig. 18).
Slide tool off hose.
13
14
A
C
15
D
A
17
F
E
Continued
A
B
18
7