Table of Contents
Advertisement
HOW TO DISASSEMBLE AND ASSEMBLE
5. CONTROL BOX, R
1) Disconnection of Cover Lamp, R(U) : Loosen one screw
in the center with a phillips screwdriver after pushing two
rail guides on the lower part of a control box, R with a
blade screwdriver, and pull the cover lamp, R(U)
forward.
2) Loosen four screws in A after taking out the lamp. Hold
a lower part of control box and take out a control box by
pulling forward and disconnect housing B from the
main body.
Cover Lamp,R(U)
A
B
6. CASE PWB
1) Loosen ten screws in
pulling up in arrow direction.
2) When disassembling the whole case PWB, disassemble
all housings first and push the case PWB in arrow
direction to disassemble from the main body.
3) When disassembling Main PWB Assembly. and Sub.
PWB Assembly from a case PWB, open each hook and
disconnect.
1
- 94 -
and remove cover PWB by
Advertisement
Table of Contents
