Fan Shroud Grille; Icemaker Assembly - LG LSC26905TT Service Manual

HOW TO DISASSEMBLE AND ASSEMBLE

3. FAN SHROUD GRILLE

1) Loosen one screw with a screwdriver blade.
2) Disassembly of an upper grille fan : Hold upper part of
an upper grille fan and pull forward carefully.
3) Disconnect housing A of an upper grille fan from the
main body.
4) Disassembly of a lower grille fan : Hold upper part of a
lower grille fan and pull forward carefully.
5) Disassembly of an upper freezer shroud : Hold lower
part and pull forward
6 ) Disassembly of an upper freezer shroud : Disconnect
housing B
7) Check foam sticking conditions around a shroud, upper
freezer and low freezer during assembling. if damaged,
torn, or badly stuck, assemble with a new one after
sealing well.
Shroud f(U)
Housing B
Grille fan(U)
Housing A
Grille fan(L)

4. ICEMAKER ASSEMBLY

1. Dispenser Model
1) How to disassemble:
(1) Remove ice bin from the freezer compartment.
(2) Loosen two screws on the upper part of icemaker
bracket.
(3) Disconnect icemaker bracket so that it can slide
forward.
(4) Disconnect icemaker housing and sensor housing.
(5) Disconnect icemaker horizontally by pressing bracket
hook part. ( Don't disassemble further. The set value
may be changed.)
2) The assembly is the reverse order of the above
disassembly.
IceMaker Bracket
IceMaker Unit
Ice Tray (Mold)
Insulation
Sensor
Sensor Cover
NOTE: If the ice tray (mold) is not horizontal after repair
and assembly, something must be wrong. Check it
and reassemble if necessary.
- 139 -
Hook
Lever