Handle; Deodorizer - LG SxS LRSPC2661T Service Manual

HOW TO DISASSEMBLE AND ASSEMBLE

2. HANDLE

1) , Disconnect Cap by using Hexagon Wrench Dirver.
2) Disconnect Handle.
3) Disconnect Holder by using Hexagon wrench Driver.
Cap
Holder
Handre
Holder

3. DEODORIZER

1) Loosen the screw in
2) Pull out a deodorant cover forward (Fig. 1) while turning
a cover in arrow direction.
3) Take out a deodorizer carefully after opening hook in
arrow direction(Fig. 2).
4) Assembly is the reverse order of disassembly.
Note : • Be sure to attach the aluminum plate of defrost
heater to the floor of intake before assembling.
1
<Fig. 1>
1
Hexagon Wrench
Driver
2
.
Deodorizer
Hook
<Fig. 2>
4. SHROUD, GRILLE FAN
1) Loosen two screws after disconnecting a cap screw of a
grille fan(U) with a blade screwdriver.
2) Disassembly of a grille fan(U) : Pull forward after
opening hook at
3) Disconnect housing A of a grille fan (L) from the main
body.
4) Disassembly of a grille fan (L) : Hold upper part of a
grille fan(L) and pull forward carefully.
5) Loosen two screws.
6) Disassembly of shroud. F(U) : Disconnect housing of B
after removing two rail guides with a balde screwdriver.
7) Disassembly of shroud. F(U) : Hold upper part and pull
forward.
8) Check foam PU sticking conditions around the shroud,
F(U) and F(L) during assembling. If damaged, torn or
poorly attached, assemble with a new one after sealing
well.
Grille Fan(U)
Cap,Screw
Grille Fan(L)
- 93 -
part with a blade screwdriver.
A
B
Shroud ,F(U)
Shroud ,F(L)