EXPLANATION FOR MICOM CIRCUIT
1-6. Switch entry circuit
The following circuits are entry circuits for sensing signal form test Switch, and the electronic single motor damper reed
Switch for examining the refrigerator.
1-7. Option designation circuit (model separation function)
The above circuits are used for designating separation by model as option and notifying the MICOM. Designation of option
by model and the application standards are as follows:
u These circuits are accurately pre-adjusted in shipment from factory and so you must not alter the option.
Separation
Connection Status
Application Standard
Connected
Export model
OP1
CUT
Domestic model
- 38 -