Installing UltraKey Lite with MAXPRO-Net
64
Figure 4-17
DynKey Configuration Tab
2.
In the drop-down menu, select the key you want to configure.
3.
In the right column, select the function you want to add to the hard key, then click
Add.
That selected function appears in the center column.
4.
Repeat
step 3
to add another function to the selected key.
5.
Click Apply to save.
Note
No more than 10 functions can be configured to a hard key.
Note
Neither the number key (#) nor the Logon key can be configured.