Step 1: Configure Ultrakey Plus To Videoblox Mode; Figure 2-7 Ultrakey Plus Login Page; Figure 2-8 System Configuration Tab - Honeywell HJK7000 Installation And User Manual

Installing UltraKey Plus with VideoBloX

Step 1: Configure UltraKey Plus to VideoBloX Mode

38
Figure 2-7 UltraKey Plus Login Page
To configure UltraKey Plus to VideoBloX mode:
1. Log onto the web browser.
2. From the top menu, click the Configuration tab. See
3. From the side menu, click the System Configurations tab.
4. From the System Mode drop down list, select VideoBlox.
5. From the System Language drop down list, select English.
6. Click Apply to save the configuration, Cancel to exit without saving, or Default to
restore all factory default values.
Figure 2-8 System Configuration Tab
Figure 2-8.