Shipping Checklist; Table 1-2 Shipping Checklist - Honeywell ULTRAKEY LITE HJC5000 Installation And User Manual

About this Document and the UltraKey Lite

Shipping Checklist

Quantity Part
1 Ultrakey Lite keyboard controller
1 Ultrakey Lite installation and user
guide
1 box Power adapter with plugs for
100-240 VAC, 12 VDC, 50-60 HZ,
1 A, 12 W
1 Connector adapter, RJ45 to DB9
male, for RS422
2 Connector adapter, RJ45 to DB9
female, for RS232
2 RJ45 network cable, 2 meters
1 RJ45 cross-over Ethernet cable, 2
meters, blue
1 RJ11 4X6 flat ribbon cable, 2 meters
1 Function key overlay
1 Terminal box
18
The following is included with your UltraKey Lite Controller shipment. Use of accessories
is dependent on the type of installation. Ultrakey Lite can be connected to the matrix
system either by serial port or Ethernet RJ45 connections.
Table 1-2

Shipping Checklist

Use with...
All installations.
All installations.
Plug adapters depend on local electrical current. Four
models are included:
• CEE 7/16 (Europlug 2.5 A/250V unearthed)
• NEMA 1-15 (North American 15 A/125V ungrounded)
• BS1363 (British 13A /230-240V 50 Hz earthed and
fused)
• CPCS-CCC (Chinese 10 A/250V)/AS 3112 ; Australian
10 A/240V).
Backwards compatibility with VideoBloX and
VideoBloX Lite CPU installations. VideoBloX
master port.
Backwards compatibility with MAXPRO-Net CPU
installations.
All installations.
Used to connect a PC directly to the Controller for web
browser configurations.
To connect from a MAXPRO and MX18 to the UltraKey Lite.
For use with VideoBloX installations.
For additional device connection requirements.