Table of Contents
Advertisement
Using the UltraKey Lite Controller
Logging Onto the Controller
Document 800-07422 Rev A
08/10
You may need to learn how to use the UltraKey Lite both before and after you begin
configuring. In this section:
•
Logging Onto the
Controller, page
•
Using the UltraKey Lite to Navigate the LCD
•
VideoBloX Key
Functions, page
•
MAXPRO Key
Functions, page
Note
Key availability is dependent on the mode selected. Functions only used with
the Standalone Mode (for PTZ/DVR functions) are not described in this
document and will be included in future releases.
1.
Connect the keyboard with a power adapter (12V (±10%) DC/1 A included) or a
network cable with PoE.
2.
To configure the main menu settings, press Alt > Clr.
3.
Enter the PIN password 3434.
Note
If an invalid password is entered, a message displays and the controller
buzzes. Repeat the steps to log on.
When you are in the Password menu, press Alt > Clr again to exit the
Password menu.
21
Menus, page
24
27
2
22
21
Hide quick links:
Advertisement
Table of Contents
