List Of Refueling, Lubrication, And Water/Oil Supply - Cub Cadet 7530 Maintenance Manual

9

List of Refueling, Lubrication, and Water/Oil Supply

9 List of Refueling, Lubrication, and Water/Oil
Supply
No. Item
1 Engine Crank Case
2 Fuel Tank
3 Radiator
4 Transmission Case
5 Front Axle Case
6 Brake Link (Left/Right)
7 Rod End 4 Points
8 Front Axle Fulcrum Shaft
Differential Locking Device
9
Pedal Fulcrum Shaft
• Engine oil ........................... Multi STOU oil or better than diesel engine oil API classified, class CD,
• Fuel .................................... Diesel gas oil
• Gear Oil.............................. Genuine oil or API classified GL - class 4, SAE, 80W
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
Classification
Kind
API Service
Over class
Engine oil
CD
Gas oil -
Cooling water (incl.
antifreeze solution 40 -
to 45%)
Gear oil
GL-4
(Multi STOU oil)
Gear oil
GL-4
(Multi STOU oil)
Grease -
Grease -
Grease -
Grease -
SAE 10W - 30.
A.P.I. specific gravity (min.) ..................................... 34
Inflammation point (min.) .................................... 60 ºC
Clouding point (Wax appearing point) (max.)..... -20.6 ºC
Pour point (max.) ............................................... -26 ºC
Distillation temperature, at point 90% ..... from 282 to 338 ºC
Viscosity : at 38 ºC
Centistokes...................................... from 2.0 to 4.3
Saybolt second universal .................. from 32 to 40
Cetane number (min.) ..... 43 (high lat. in winter: from 45 to 55)
Capacitance ratio of water and sediment (max.)....... 0.05%
Weight ratio of sulfur (max.) .............................. 0.50%
Corrosion of copper strip (max.) ...........................No.2
Weight ratio of ash residue (max.)..................... 0.01%
30
Capacity (L)
SAE
Viscosity No.
4.2
10W-30
{1.1}
27
-
{7.1}
5.5
-
{1.5}
80W GEAR : 29L{7.7gal}
(10W-30) HST : 32L{8.5gal}
80W 4.0
(10W-30) {1.1}
- Properly
- Properly
- Properly
- Properly
Replacing Period
Inspect pre-operation
and change every 100
hrs. (Change after 50 hrs
st
at 1 inspection.)
Inspect pre-operation.
(Supply accordingly.)
Inspect pre-operation.
(Supply accordingly.)
Change after
st
100hrs 1 time and
every 200 hrs after.
Change after
st
100hrs 1 time and
every 200 hrs after.
Lubricate before operation
and every 50 hrs.
Lubricate before operation
and every 50 hrs.
Lubricate before operation
and every 50 hrs.
Lubricate before operation
and every 50 hrs.