Cub Cadet 7530 Maintenance Manual page 166

9
3. Steering action does not
follow the steering
operation
4. Front wheel drifts.
(Excessive backlash of
steering wheel)
5. Unusual noise in
hydraulic circuit
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
Troubleshooting
• Damage or wear of hydraulic
pump
• Insufficient oil amount
• Air mixture
• Valve malfunction
• Backlash in rod end
• Looseness in tightening part
• Toe in failure
• Air mixture
• Backlash in rod end
• Looseness in tightening part
• Insufficient oil (Transmission
oil)
• Sound of cavitations due to
excessive suction resistance.
124
• Repair or change.
• Supply oil to specified
amount.
• Bleed air sufficiently and
inspect oil amount and
suction pipes.
• Repair.
• Change.
• Tighten.
• Adjust.
• Bleed air.
• Change.
• Tighten.
• Adjust backlash of pedal.
• Change clutch disc.
HST: 32L {8.5gal}
Gear: 29L {7.7gal}