Operation Check Mode For Player Section - Pioneer CDJ-200 Service Manual

1
3. Operation Check mode for the Player section
Player Operation mode: ON
A
POWER OFF
Player Operation mode: CANCEL
B
POWER OFF
This mode consists of Player Operation mode and Test Operation mode.
Player Operation mode
In this mode, basic operations of the servomechanism, such as setup, playback, pause, and track search, are checked.
Error rates can also be measured.
Test Operation mode
C
Servo operations can be controlled step by step in detail.
Notes:
• Switching from Player Operation mode to Test Operation mode can be accomplished by pressing the MASTER TEMPO key.
• Commands in Test Operation mode are mainly for testing the mechanism and servomechanism, not for testing the DJ
functions, such as scan and tempo.
• Player Operation mode
Function
Play(trace) / Pause
D
Track Search F/R
Error Rate Count
Eject
Mode Change
E
• Description of commands in Player Operation mode
Play (trace)/Pause
If this command is issued in Stop mode, the unit is set up and starts playing. If the command is issued in Playback mode,
pause and playback are alternately performed each time the PLAY/PAUSE key is pressed. The address currently being
played back is displayed on the FL display.
Note: In this mode, auto setup is not performed when a disc is inserted. Playback in this mode does not mean audio playback
but trace of the signal area on a disc. In playback, tracing is performed at double the speed of normal playback.
No audio signal is output.
F
54
1
2
TEXT MODE JET
Key on the main unit
PLAY/PAUSE
TRACK SEARCH ¢/4
CUE
EJECT
MASTER TEMPO
2
3
POWER ON
MASTER TEMPO
• Test Operation mode
Function
Servo All Off
LD On/Off
Focus On/Off
Spindle Kick, Tracking On/Off
Tracking Off
Slide FWD (2mm)
Slide REV (2mm)
Pickup Up/Down
Mode Change
CDJ-200
3
4
MASTER TEMPO
Player
Operation
mode
LED lit
Test
Operation
mode
LED unlit
Key on the main unit
TIME
TEMPO
RELOOP
(LOOP) IN/REALTIME CUE
(LOOP) OUT
SEARCH ¡
SEARCH 1
AUTO CUE
MASTER TEMPO
4