Specifications - Pioneer CDJ-200 Service Manual

1

1. SPECIFICATIONS

• KUCXJ type
1. General
A
System..............................Compact disc digital audio system
Power requirements.....................................AC 120 V, 60 Hz
Power consumption.......................................................14 W
Operating temperature............+5˚C – +35˚C (+41˚F – +95˚F)
Operating humidity...............................................5 % – 85 %
(There should be no condensation of moisture.)
Weight..............................................................3.2 kg (7.1 lb)
Dimensions.........................216 (W) × 292 (D) × 99.5 (H) mm
8 – 1/2 (W) × 11 –1/2 (D) × 3 – 15/16 (H) in
2. Audio section
B
Frequency response........................................4 Hz – 20 kHz
Signal-to-noise ratio..........................110 dB or more (JEITA)
Distortion.................................................... .0.006 % (JEITA)
3. Accessories
• Operating instructions........................................................1
• Power cord........................................................................ 1
• Audio cable....................................................................... 1
• Control cable..................................................................... 1
• Forced eject pin (housed in a groove in the bottom panel)... 1
• Limited warranty................................................................ 1
C
NOTE:
Specifications and design are subject to possible modification
with-out notice.
• WYXJ type
1. General
System.......................... Compact disc digital audio system
Power requirements .................... AC 220-240 V, 50/60 Hz
Power consumption ..................................................... 16 W
Operating temperature .................................. +5°C – +35°C
Operating humidity ............................................ 5 % – 85 %
D
(There should be no condensation of moisture.)
Weight ....................................................................... 3.2 kg
Dimensions ..................... 216 (W) x 292 (D) x 99.5 (H) mm
2. Audio section
Frequency response...................................... 4 Hz – 20 kHz
Signal-to-noise ratio ....................... 110 dB or more (JEITA)
Distortion ................................................... 0.006 % (JEITA)
3. Accessories
• Operating instructions ..................................................... 1
E
• Power cord ...................................................................... 1
• Audio cable ..................................................................... 1
• Control cable ................................................................... 1
• Forced eject pin (housed in a groove in the bottom panel)... 1
NOTE:
Specifications and design are subject to possible modification
with-out notice.
F
6
1
2
• RLTXJ, RFXJ types
1. General
System........................... Compact disc digital audio system
Power requirements .... AC 110-120 V/220-240 V, 50/60 Hz
Power consumption ..................................................... 16 W
Operating temperature .................................. +5°C – +35°C
Operating humidity ........................................... 5 % – 85 %
(There should be no condensation of moisture.)
Weight ........................................................................3.2 kg
Dimensions ...................... 216 (W) x 292 (D) x 99.5 (H) m
2. Audio section
Frequency response...................................... 4 Hz – 20 kHz
Signal-to-noise ratio ....................... 110 dB or more (JEITA)
Distortion ................................................... 0.006 % (JEITA)
3. Accessories
• Operating instructions ..................................................... 1
• Power cord ...................................................................... 1
• Audio cable ..................................................................... 1
• Control cable ................................................................... 1
• Forced eject pin (housed in a groove in the bottom panel)... 1
NOTE:
Specifications and design are subject to possible modification
with-out notice.
Voltage selector (RLTXJ, RFXJ types only)
• You can find the voltage selector switch on the bottom plate
of the unit.
The factory setting for the voltage selector is 220 – 240 V.
Please set it to the correct voltage for your country or region.
• For Taiwan, please set to 110 – 120 V before using.
Before changing the voltage, disconnect the AC power cord.
Use a medium size screwdriver to change the voltage
selector switch.
CDJ-200
2
3
220-240V
110-120V
3
4
For Taiwan: 17 W
m
4