Serial Cable Information - Oki Microline 520 Service Handbook

%Serial Cable Information

Serial Cable Information
The information in this section will help you make a serial cable to connect between the printer and
computer.
Refer to the computer documentation to determine the cable requirements on the computers end.
The printer has the following cable requirements.
· Shielded, RS-232C cable
· UL and CSA approved
· No more than 50 feet long
· Cannon DB-25P plug (or equivalent) with 25 pins
· Cannon DB-C2-J9 (or equivalent) connector shell
ML520/521 ( 96-02-04 )