Ribbon Protector - Oki Microline 520 Service Handbook

%3.2.03 Ribbon Protector

3.2.03 Ribbon Protector
CAUTION
You MUST use a straight slot screwdriver to release the ribbon protector. If you attempt to lift the
protector without releasing the tabs, the protector will break.
1. Perform these procedures: 3.2.01, and 3.2.02.
2. Open the pull-up roller cover (1).
3. Use a straight-slot screwdriver to release the extensions (2) from the carriage frame set (3).
4. Lift the ribbon protector (4) straight up and remove it.
P/N 53562801 Protector: Ribbon RSPL Both B.2.07
ML520/521 ( 96-02-04 )