Oki Microline 520 Service Handbook page 11

NOTE:
Roller marks may mar the transparency under high temperature / high humidity conditions.
Weight: 12 to 24 lbs. (45 to 90 g/m 2 )
Width: Microline 520 7.2 to 8.5 inches (18.2 to 21.5 centimeters)
Microline 521 7.2 to 14.3 inches (18.2 to 36.3 centimeters)
Length: 3 to 17 inches (7.62 to 43.18 centimeters)
Thickness: 0.14 inches (0.36 millimeters)
Paper Feed Path: Top
Printhead Gap Information: Refer to the Printhead Gap Information, Section 1.6.
1.7.02 Length
NOTE:
The recommended length is specific to paper type.
Rear Feed
Minimum 3 inches (7.62 centimeters)
Maximum 17 inches (43.18 centimeters)
Bottom Feed
Minimum 3 inches (7.62 centimeters)
Maximum 17 inches (43.18 centimeters)
Top Feed
Minimum 3 inches (7.62 centimeters)
Maximum 17 inches (43.18 centimeters)
1.7.03 Number of Copies
Original + 4 Interleaf
Original + 4 Carbonless
Original Cut Sheet
1.7.04 Thickness
0.014 inches / 0.36 mm Maximum Thickness, Rear Feed
0.017 inches / 0.44 mm Maximum Thickness, Bottom Feed
1.7.05 Weight
NOTE:
The recommended weight is specific to paper type.
Minimum: 9 lb. (35 g/m 2 )
Maximum: 120 lb. (90 g/m 2 )
1.7.06 Width
NOTE:
The recommended width is specific to paper type.
Paper
Microline 520
Minimum: 3.5 inches ( 8.8 centimeters)
Maximum: 10.5 inches (26.6 centimeters)
Microline 521
Minimum: 3.5 inches ( 8.8 centimeters)
Maximum: 16.5 inches (41.9 centimeters)
Printing Area
Microline 520 8 inches Maximum
Microline 521 13.6 inches Maximum
ML520/521 ( 96-02-04 )