Kenwood DNX7180 Quick Start Manual page 11

DNX7180/DNX7480BTIDNX6980/DNX6180/DNX6040EX/DNX6480BT
v
(Reset)
MENU
NAV
TEL
Volume Knob
SCRN
[!]
Remote
lI]
Sensor
~
(Eject)
[!J
Disc insert
~
slot
MicroSD
~
card slot
*The display may not switch to the Tone Control screen in some conditions.
If
• the unit or the connected unit fails to operate properly, the unit returns
to factory settings when this button is pressed (Instruction Manual
P.97).
• If the SI function is turned on, this indicator flashes when the vehicle
ignition is off (Instruction Manual P.72).
• Displays the Top Menu screen (Instruction Manual P.14).
• Pressing for 1 second turns the power off.
• When the power off, turns the power on.
• Displays the navigation screen.
• Pressing for 1 second switches AV out sources.
• Displays the Hands Free screen (Instruction Manual
• North America Sales area:
current music from HD Radio (Instruction Manual
· Central and South America sales area:
display.
• Pressing switches attenuation of the volume on/off.
• Turning adjusts volume up or down.
• Pressing for 1 second displays Tone Control screen (Instruction Manual
P.87).*
• Displays the Screen Control screen.
• Pressing for 1 second displays rear view camera display.
Receives the remote control signal.
You can enable or disable this feature by Remote Sensor (Instruction
Manual P.71).
• Ejects the disc.
• Pressing for 1 second ejects the disc forcibly.
A slot to insert a disc media.
A microSD card slot for upgrading the map. For how to upgrade the map,
refer to the instruction manual of the navigation system.
-11-
P.SS).
Pressing for 1 second stores the tag data of the
P.Sl).
Pressing for 1 second turns off the
IDNX5180