Prepare the hard drive.
2.
Install the hard drive.
3.
Determine the status of the hard drive from the hot-plug SAS hard drive LED combinations
4.
SATA hard drive LED
Processor option
WARNING:
internal system components to cool before touching them.
CAUTION:
multiprocessor configurations must contain processors with the same part number.
CAUTION:
with a processor and a heatsink or a processor socket cover and a heatsink blank.
CAUTION:
heatsink is removed from the processor after it has been installed.
IMPORTANT:
bracket with the alignment holes in the heatsink.
combinations" on page 8).
To reduce the risk of personal injury from hot surfaces, allow the drives and the
To prevent possible server blade malfunction and damage to the equipment,
To prevent possible server blade overheating, always populate processor socket 2
The heatsink thermal interface media is not reusable and must be replaced if the
When installing the heatsink, align the guide pins on the processor retention
("SAS and
Hardware options installation 22