Hp Trusted Platform Module Option - HP ProLiant BL460c G6 User Manual

Install the hard drive backplane. Press down on the hard drive backplane retainer to seat the board.
15.
Install the hard drives
16.
Install the access panel (on page 14).
17.
Install the server blade
18.

HP Trusted Platform Module option

Use these instructions to install and enable a TPM on a supported server blade. This procedure includes three
sections:
Installing the Trusted Platform Module board (on page 40).
1.
Retaining the recovery key/password (on page 43).
2.
Enabling the Trusted Platform Module (on page 43).
3.
Enabling the TPM requires accessing the ROM-Based Setup Utility (RBSU)
Utility" on page 55). For more information about RBSU, see the HP website
(http://www.hp.com/support/smartstart/documentation).
TPM installation requires the use of drive encryption technology, such as the Microsoft® Windows®
BitLocker™ Drive Encryption feature. For more information on BitLocker™, see the Microsoft website
(http://www.microsoft.com).
CAUTION:
can cause hardware damage or halt data access.
When installing or replacing a TPM, observe the following guidelines:
•
Do not remove an installed TPM. Once installed, the TPM becomes a permanent part of the system
board.
•
When installing or replacing hardware, HP service providers cannot enable the TPM or the encryption
technology. For security reasons, only the customer can enable these features.
•
When returning a system board for service replacement, do not remove the TPM from the system board.
When requested, HP Service provides a TPM with the spare system board.
("Hard drive option" on page 21).
("Installing a server
Always observe the guidelines in this document. Failure to follow these guidelines
blade" on page 18).
("HP ROM-Based Setup
Hardware options installation 39