Connecting To The Network; Installing A Server Blade - HP ProLiant BL460c G6 User Manual

Connecting to the network

To connect the HP BladeSystem to a network, each enclosure must be configured with network interconnect
devices to manage signals between the server blades and the external network.
Two types of interconnect modules are available for HP BladeSystem c-Class enclosures: Pass-Thru modules
and switch modules. For more information about interconnect module options, see the HP website
(http://www.hp.com/go/bladesystem/interconnects).
IMPORTANT:
module to a network device that supports Gigabit speed.

Installing a server blade

CAUTION:
or the enclosure unless all hard drive and device bays are populated with either a component or
a blank.
Remove the device bay blank.
1.
To connect to a network with a Pass-Thru module, always connect the Pass-Thru
To prevent improper cooling and thermal damage, do not operate the server blade
Setup 18