Board (B/W Evf Model) - Sony CCD-TR618 Service Manual

2-7. VF-129 BOARD (B/W EVF MODEL)
1 FFC-289 flexible
flat cable (4P)
3 Finder (S) assembly
Rotate it in the direction of
the arrow B and remove it
in the direction of the arrow C .
C
B
4
1
2 Two tapping
screws (B2 5)
3 B/W EVF section
2 Three tapping
screws (B2 5)
A
1 F lock
screw (T)
2 Slide the button in the
direction of the arrow A .
REMOVING THE CRT ASSEMBLY AND VF-129 BOARD
4 High voltage
cover
4
(TR model)
3 VF base B (10)
1 Tape (A)
2 Two loose
stopper screws
(M2 3)
8 CRT assembly, VF-129 board,
1 VF hinge assembly
2 CRT socket (4P)
1 CRT DT connector (4P)
2-8
(TRV model)
3 VF base B (12)
PRECAUTION DURING INSTALLATION
Tape (A)
FFC-289 flexible
flat cable
FFC-289 flexible flat cable
4 EVF cabinet
upper B assembly
3 Claw
2 Two tapping
screws
(B2
5 Tapping screw
(B2 5)
6 EVF tally
7 EVF cabinet lower B
6 CRT assembly
5 Anode cable (1P)
Do not pull the cable,
but remove it in the
vertical direction.
3 Remove the high voltage
cover with a flat head
(–) screwdriver.
High voltage cover
7 VF-129 board
5)