Using Your Lifebook Security Panel; Precautions; Uninstalling The Security Panel Application - Fujitsu LifeBook T901 Series User Manual

Using Your Lifebook Security Panel

The security lock feature is in effect both when
the system resumes from Off, Standby, or
Hibernation state. You always need to push
the Security Panel buttons to input the user
password. Your system will not begin the boot
sequence until you enter your supervisor/user
password.
From Off State
1. Turn on your system.
2. When the Security Indicator fl ashes, enter
the pass-word and press Enter button.
For example, if the password is 22222, fi rst
press Button 2 fi ve times and press the Enter
button. The Tablet PC will boot to normal
operation.
From Standby/Hibernation State
1. Press your Suspend/Resume button.
2. When the Security Indicator fl ashes, enter
the pass-word and press Enter button.
The Tablet PC should resume normal
operation.
Incorrect Password Entry
If an invalid supervisor or user password is
entered three times in succession, the system will
"beep" for about one minute. If a valid password
is entered within a minute (while system beeps),
the beeping will stop and the Tablet PC will
resume normal operation. If no password is
entered or an invalid password is entered while
the system beeps, the system will return to its
previous locked state (standby or off) and the
Security Indicator will go off. To reactivate the
Tablet PC after a password failure, you must
press the Suspend/Resume button, then enter
a correct password.
Remember the user password you specifi ed
on the Security Panel Application. If you
forget the password you will not be able to
use your computer. The supervisor password
can override the user password.
Getting to Know Your Tablet PC

Precautions

Opening and Closing the Cover
By default, closing the cover automatically places
your system into Standby mode. (You can change
the action the system takes when the cover is
closed by opening the Power Options Properties
icon in the Control Panel, and selecting the
Advanced tab. Make a choice from the drop down
menu for "When I close the lid of my portable
computer:" and click the [OK] button.) Opening
the cover does not automatically place the Tablet
PC into normal operation. Instead, you must enter
the proper security password after pushing the
Suspend/Resume button.
Low Battery Operations
If your Tablet PC has a low battery, pushing
the suspend/resume button only turns on the
Security Indi-cator. Your Tablet PC does not
unlock, the Security Indicator turns off after one
minute. To resume normal operation, fi rst attach
a power supply to the Tablet PC. Then you may
unlock the Tablet PC.
Uninstalling The Security Panel
Application
You have two options when uninstalling the
security panel application:
• Remove passwords and uninstall the security
panel application software. This will disable all
security features.
• Uninstall the security panel application with
password still active. This will not allow any
changes to the password.

Uninstalling the Security Panel Application

Software
Remove passwords when User wants no
password protection whatsoever and doesn't
want to give anybody the utility to set a password
on their computer. In this case, if passwords
(supervisor, user, or both) are set, the passwords
must fi rst be cleared BEFORE removing the
application. To clear passwords, follow same
procedure in SETTING PASSWORD CODES
except this time, select REMOVE, enter current
password then click Next. When asked to confi rm
select Yes.
29