Fujitsu LifeBook T901 Series User Manual page 88

Tablet pc
Hide thumbs Also See for LifeBook T901 Series:
Table of Contents

Advertisement

Problem
Shutdown and Startup Problems
The Suspend/
The Suspend/Resume
Resume button
button is disabled from the
does not work.
Advanced submenu of the
Power menu of the setup
utility.
You did not hold the
button in long enough.
There may be a confl ict with
the application software.
The system
The boot sequence settings
powers up, and
of the setup utility are
displays power-on
not compatible with your
information, but
confi guration.
fails to load the
operating system.
You have a secured system
requiring a password to load
your operating system.
An error message
Power On Self Test (POST)
is displayed on
has detected a problem.
the screen during
the Tablet PC boot
sequence.
Your system display
The system may be
won't turn on when
password-protected.
t h e s y s t e m i s
turned on or when
the system has
resumed.
Your Tablet PC
BIOS setup changes were
appears to change
not saved when you made
setup parameters
them and exited the BIOS
when you start it.
setup utility returning it to
previous settings.
The BIOS CMOS back-up
battery has failed.
78
Possible Cause
Possible Solution
Enable the button from the setup utility.
Hold the button longer. This may need to be a
few seconds if your application is preventing the
CPU from checking for button pushes.
Close all applications and try the button again.
Set the operatinag source by pressing the [ESC]
key while the Fujitsu logo is on screen or use the
[F2] key and enter the setup utility and adjust the
source settings from the Boot menu.
Make sure you have the right password. Enter
the setup utility and verify the Security settings
and modify them as accordingly.
See the Power On Self Test (POST) messages
to determine the meaning and severity of the
problem. Not all messages are errors; some are
simply status indicators.
Check the status indicator panel to verify that
the Security icon is blinking. If it is blinking, enter
your password.
Make sure you select Save Changes And Exit
when exiting the BIOS setup utility.
Contact your support representative for repairs.
This is not a user serviceable part but has a
normal life of 3 to 5 years.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents