JVC HX-C6 Service Manual page 19

3.2.2 Removing the front panel assembly
(See Figs.2 and 3)
Reference:
Remove the side panel assembly as required.
(1) Insert the tip of a flat-bladed screwdriver or similar tool into
the space between the speaker main body and front panel
assembly, and lift the front panel assembly little by little to
remove the joint sections b. (See Fig.2.)
(2) From the inside of the front panel assembly, disconnect the
wires (blue and black wires) from the terminals on the
tweeter. (See Fig.3.)
3.2.3 Removing the tweeter
(See Fig.3)
• Remove the front panel assembly.
Reference:
Remove the side panel assembly as required.
(1) From the inside of the front panel assembly, remove the
wires (red and black wires) from the soldered sections c on
the terminals of the tweeter.
(2) Remove the two screws B, take out the tweeter from the
front panel assembly.
Front panel assembly
b
b
b
Fig.2
Spacer
Black wire
Red wire
B
Terminals
Fig.3
b
c
Blue wire
Black wire
c
B
Tweeter
(No.MB366)1-19