Audio Playback; Agps; Unit Converter - Sonim XP3 User Manual

The recorded audio file is stored under My files. For more
information refer "Managing Your Files" on page

Audio Playback

The user can do instant playback of the recorded audio
within the voice recorder. To listen to an recorded audio
file, select Menu > My files > Sounds. Select the file.

AGPS

The Global Positioning System (GPS) is a Global
Navigation Satellite System. It uses satellites that transmit
precise microwave signals, which enable GPS receivers to
determine their current location and time.
When an user accesses an application
that requires GPS, then GPS is turned on
automatically. After the application is closed,
GPS is turned off automatically.
The GPS relies on satellite signal to calculate position.
Under conditions of poor satellite reception (that is,
under a tree, bad weather, and so on) standalone GPS
receivers take long time (sometimes a few minutes) to
provide location information to the users. The special
feature Assisted GPS (AGPS) available in Sonim XP3
Sentinel speeds up the phone's process of calculating
the position irrespective of the signal conditions. When
AGPS is enabled, the phone automatically downloads
the latest satellite related information (Ephemeris data)
through GPRS. This information is used along with the
satellite signals to calculate the position (Downloading of
Ephemeris data may result in network charges).
Select Menu > Tools > AGPS. This allows the user to
configure the usage of AGPS feature. This helps the user
to control any network charges that is incurred due to
downloading of Ephemeris. The following options are
displayed.
62.
Never: Ephemeris will not be downloaded and used.
•
• Always: Ephemeris data is downloaded once every
day.
While Not Roaming: Ephemeris data will not be
•
downloaded if the phone is in roaming.
Stopwatch
Select Menu > Tools > Stopwatch.
1. To trigger the timer, select Start. The counter starts
running.
2. To temporarily stop the counter, select Pause.
3. To resume running the counter, select Go.
To stop the counter, select Stop.
4.

Unit Converter

You can convert one type of physical units to another
type. Select Menu > Tools > Unit converter.
1. Select the type of physical unit. Use the Right or Left
navigation keys to scroll. For example, Temperature.
2. Scroll down and select the Unit 1 for Temperature, for
example, Fahrenheit.
3. Scroll down and enter the amount for Fahrenheit in
Amount 1, for example, 80.
4. Scroll down and select the Unit 2 for Temperature, for
example, Celsius.
5. The Temperature in Celsius is displayed in Amount 2.
56