Sonim XP3 User Manual page 24

Keypad key
to
Operations
• May be configured by Lone Worker service provider to send pre-configured
messages to the server or to perform specific tasks.
• May be configured by Lone Worker service provider to send pre-configured
messages to the server or to perform specific tasks.
• May be configured by Lone Worker service provider to send pre-configured
messages to the server.
• Press and hold to turn on or off the torch.
• May be configured by Lone Worker service provider to send pre-configured
messages to the server.
• Press and hold to display '+' used for dialing an international number, while
in standby mode.
• When entering text, press to enter a dot (.).
• Press and hold to lock the keypad. Use it as a toggle key to lock and
unlock the keypad, while in standby mode.
When entering text, press to display special characters, for example,
•
period, comma, and so on. Press and hold to display the text input
languages.
• Press and hold in standby mode to switch between Silent on/off modes.
• When entering text, press to switch between lower case, upper case or
numeric. Press and hold to enable T9 mode.
24