Sonim XP3 User Manual page 32

Default Settings
Select to reset the settings to the original factory settings.
Please note that this can remove changes you have made
to your settings.
Display Settings
Select Menu > Settings > Display tab . The following
display settings are displayed:
Wallpaper: Allows you to set the background screen
1.
display using the embedded pictures available in
your phone or from your own pictures that you have
downloaded on to your phone or Micro SD card. The
selected wallpaper is displayed on the home screen
only if you select On.
2. Themes: Allows you to set the colour theme and
icons for the main menu and other screens. There
are two themes available. Select Menu > Settings >
Display tab > Themes > Theme 1 OR Theme 2 >
OK.
3. Backlight Level: Select the backlight level of the
screen display as maximum, high, medium or low.
4. Backlight Duration: Keeps the screen display active
for the period chosen by you. Select the screen
display active time as 10 sec, 30 sec or 60 sec.
5. Greeting: Select On. Enter the greeting and Save to
make it appear on the screen while powering on the
phone.
Screensaver: Select On to make the screen saver
6.
appear on the idle screen. User can select the
screensaver image.
Sound Settings
Select Menu > Settings > Sounds tab . Changing it
effects the current set profile.The following sound settings
are displayed:
Alert Type: You can set the alert type for incoming
1.
calls and SMS alerts. You can select from Ring only,
Vibrate only, Vibrate then Ring, Ring and Vibrate or
Silent.
2. Ringtone: You can set different ringtones for your
calls., SMS alerts, alarms, organizer and calendar.
You can select from Default sounds (pre-recorded
factory tunes) OR Phone memory (downloaded via
WAP, personal recordings or files transferred via
Bluetooth) OR Memory card.
You can download and store ring tones over
Bluetooth or WAP. The ringtone formats are
MIDI, MP3, WAV, AAC and AMR.
3. Ringer Volume: You can set the ringer volume for
GSM calls, alarms and alerts.
Key Tone: You can set the keypad sound as Off, Low,
4.
Medium or High.
5. Shutter Sound: You can set the camera shutter
sound.
Battery Alert: Select On to get any low battery alert.
6.
Connectivity Settings
Select Menu > Settings > Connectivity tab. The following
connectivity settings are displayed:
32