Sonim XP3 User Manual page 15

Sentinel
Hide thumbs Also See for XP3:
Table of Contents

Advertisement

4
Close Cover
Close the battery cover. Rotate
the battery cover screws in
clockwise direction. You can
use the screwdriver provided to
tighten the screws.
Removing the Battery
Follow steps 1 and 2 of
"Inserting the Battery" on page
To remove the battery, lift the cover behind the phone and
raise the upper end of the battery from the slot.
The battery can now be removed.
Follow step 4 of
"Inserting the Battery" on page 14
the cover.
Charging the Battery
The battery delivered with your mobile phone is not fully
charged. We recommend that you charge your mobile for 5
hours before you use your mobile phone for the first time.
The phone with a fully charged battery can
remain in the standby mode for a duration of
up to 1500 hours. If the battery is completely
out of charge, it can take several minutes for
the charging icon to appear when the charger
is connected.
1
Insert Charger
Insert the charger plug into a power outlet.
2
Connect to Phone
Insert the mini USB connector
of the charger to the socket at the
bottom of the phone.
14.
3
Charging Animation
to close
If the battery is being charged when
the phone is switched off,only the
battery icon is displayed (as
shown in the adjacent figure).
4
Charging Icon
If the battery is being charged while
the phone is switched on, you will
notice that the bars in the battery
charge icon (visible on the home
screen) show movement indicating
that the battery is being charged.
After the phone is fully charged the
battery bars on the display stop
scrolling. You can disconnect the
charger from the phone.
15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xp3 sentinel

Table of Contents