Override The Program Settings - Honeywell MAGICSTAT CT3300 Installation And Programming Instructions

Override the program settings

Note: Make sure the System switch is set to either HEAT or COOL
before making any changes to the schedule.
Change the temperature temporarily
Press or
The TEMPORARY indicator is displayed indicating that the change
is temporary (Fig. 27).
Note: A temporary change to the temperature lasts for the current
program period only. The heating/cooling schedule that you
programmed resumes when the next scheduled program period is
reached. To cancel the temporary change before the next
scheduled program period, press
Hold a temperature indefinitely
Use the Hold Temp feature when you want to maintain a constant
temperature indefinitely, such as when you go on vacation.
a. Press .
"HLd" is displayed (Fig. 28).
b. Press or
displayed.
The display shows the SET temperature for a few seconds and
then resumes reading the current room temperature.
Note: To cancel the hold, press
69-0654-5
until the desired temperature is displayed.
.
until the desired temperature is
.
Fig. 27
Fig. 28
19
OPERATION