Program Schedule Override; Setting Degrees Fahrenheit Or Celcius - Honeywell T6 Pro User Manual

Program schedule override (temporary)
1 Press or
2 Once at the desired setpoint temperature,
no further action is needed. The new
setpoint temperature will be held until the
next scheduled time period begins. For more
information on schedule time periods, see
"Program Schedule" on page 3.
3 To cancel the Temporary Hold, Press
and then press Cancel.
Program schedule override (permanent)
1 Press or to adjust the temperature.
2 TEMPORARY HOLD is displayed and
the setpoint temperature flashes. While
it's flashing, press Hold (Mode) button to
change to Permanent Hold.
3 To cancel the Permanent Hold, press
and then press Cancel.
Setting degrees Fahrenheit (F) or Celcius (C)
1 Press Menu.
to go to F / C. Press Select.
2 Press or
3 Press or for F or C. Then press Select.
4 Press Home to return to the home screen.
to adjust the temperature.
or
or
4
Hold