Other Setup - Denon AVR-1312 Getting Started

Other Setup

Make various other settings.
Setting items
HDMI Audio Out Amp : Play back through speakers connected to the receiver.
Select HDMI audio output TV : Play back through TV connected to the receiver.
device.
If "TV" is selected, only an HDMI audio signal is output from the TV.
Auto Surround ON : Memorize settings. Automatically play with the last used surround
Make setting for mode.
memorizing surround mode OFF : Do not memorize settings. Surround mode does not change
setting for each input signal according to input signal.
type.
The auto surround mode function lets you store in the memory the
surround mode last used for playing the four types of input signals listed
below.
q Analog and PCM 2-channel signals
w Dolby Digital and DTS 2-channel signals
e Dolby Digital and DTS multi-channel signals
r LPCM Multi-channel signals
Bright : Normal display brightness.
Display
Adjust the display Dim : Reduced display brightness.
brightness of this unit. Dark : Very low display brightness.
OFF : Turns the display off.
Buttons on the main unit can be used for
operations.
Each time
changed as shown below.
BD
Default settings are underlined.
Setting details
DIMMER
is pressed, the setting is
Bright Dim
OFF Dark
Setting items
Setup Lock ON : Turn protection on.
Protect settings from OFF : Turn protection off.
inadvertent change.
To turn OFF the "Setup Lock", follow the
procedure below.
q Press and hold
"Setup Lock:0ON 1" appears on the display.
p
w Press
ENTER
NOTE
When "Setup Lock" is set to "ON", the settings listed below can no
longer be changed. Also, "Setup Lock!" is displayed if you attempt to
operate related settings.
• Menu operations
• RESTORER
35
Setting details
MENU
for at least 3 seconds.
to select "OFF", and then press
.
• Channel Level
• Audio Adjust
Option Setup