Playback (Advanced Operation); Convenient Functions - Denon AVR-1312 Getting Started

Playback (Advanced operation)

Playback (Basic operation) (vpage 11)
Selecting a listening mode (Surround mode)
(vpage 19)
n Adjusting the volume of the speakers
(vpage 26)
n Sleep timer function (vpage 27)
n Quick select function (vpage 27)
n Various memory functions (vpage 27)
BD

Convenient functions

Adjusting the volume of the speakers
You can adjust the channel level either according to the playback
sources or to suit your taste, as described below.
n Adjusting the volume of the different speakers
1
CH LEVEL
Press .
Channel Level
Front L 0.0dB
Center 0.0dB
Front R 0.0dB
Subwoofer 0.0dB
Surround R 0.0dB
Surround L 0.0dB
Fader Front Rear
2
Use ui to select the speaker.
The speaker that can be set switches each time one of the
buttons is pressed.
3
Use o p to adjust the volume.
• In the case of a subwoofer, pressing o when it is at "–12 dB" will
change the setting to "OFF".
• If you do not press any button for approximately 5 seconds, the
menu screen light turns off.
• When a headphone jack is inserted, the headphone channel level
can be adjusted.
26
n Adjusting the volume of groups of speakers
(Fader function)
This function lets you adjust (fade) the sound all at once from the
front (front speaker / center speaker) or rear (surround speaker /
surround back speaker).
1
CH LEVEL
Press .
Channel Level
Front L 0.0dB
Center 0.0dB
Front R 0.0dB
Subwoofer 0.0dB
Surround R 0.0dB
Surround L 0.0dB
Fader Front Rear
2
Press i to select "Fader", then select the item to be
adjusting using o p.
Channel Level
Front L 0.0dB
Center 0.0dB
Front R 0.0dB
Subwoofer 0.0dB
Surround R 0.0dB
Surround L 0.0dB
Fader Front Rear
3
Use o p to adjust the volume of the speakers.
(o : front, p: rear)
• If you do not press any button for approximately 5 seconds, the
menu screen light turns off.
• The fader function does not affect the subwoofer.
• The fader can be adjusted until the volume of the speaker is adjusted
to the lowest value of –12 dB.