Other Setup; Adjusting The Sound Fi Eld Effects - Denon AVR-391 Owner's Manual

ENGLISH

Other Setup

Make various option settings.
Setting items
Audio Out Amp : Play back through speakers connected to the receiver.
Select HDMI audio output TV : Play back through TV connected to the receiver.
device.
If "TV" is selected, only an HDMI audio signal is output from the TV.
Auto Surr. ON : Memorize settings. Automatically play with the last used surround
(Auto Surround Mode) mode.
Make setting for OFF : Do not memorize settings. Surround mode does not change
memorizing surround mode according to input signal.
setting for each input signal
The auto surround mode function lets you store in the memory the
type.
surround mode last used for playing the four types of input signals
listed below.
q Analog and PCM 2-channel signals
w Dolby Digital and DTS 2-channel signals
e Dolby Digital and DTS multi-channel signals
r LPCM Multi-channel signals
Display Bright : Normal display brightness.
Adjust the display Dim : Reduced display brightness.
brightness of this unit. Dark : Very low display brightness.
OFF : Turns the display off.
Buttons on the main unit can be used for
operations.
Each time
setting is changed as shown below.
Setup Lock ON : Turn protection on.
Protect settings from OFF : Turn protection off.
inadvertent change.
To release "Setup Lock", hold
–" appears on the display.
NOTE
When "Setup Lock" is set to "ON", the settings listed below can no
longer be changed. Also, "Setup Lock!" is displayed if you attempt to
operate related settings.
· Menu operations
· RESTORER
34
Remote control operation
buttons
Default settings are underlined.
Setting details
DIMMER
is pressed, the
Bright Dim
OFF Dark
MENU
pressed until "Setup Lock • ON
· Channel Level
Move the cursor
(Up/Down/Left/Right)
Option Setup
Adjusting the sound fi eld effects
The sound being played in the surround mode can be adjusted to your liking.
The items (parameters) that can be adjusted depend on the signal being input and the currently
set surround mode. For details on the adjustable parameters, see "Surround modes and surround
parameters" (vpage 44).
Items that can be set with the audio adjust procedure
Surround Parameter (vpage 34)
Tone (vpage 36)
NIGHT MODE (vpage 36)
RESTORER (vpage 36)
Audio Delay (vpage 36)
Surround Parameter
Adjust surround sound parameters. It may not be possible to set this item depending on the input signal.
Surround parameter menu operations
1 Press
SURROUND PARAMETER
The menu is displayed on the display of this unit.
Use ui to select the mode according to the playback content.
2
3 Use o p to select an item to be set and then press
• To return to the previous item, press
• Exiting the Menu, press
The menu returns to normal display.
Confi rm the setting
and then press
ENTER
Surround Para
Mode:• Cinema –
ENTER
RETURN
.
SURROUND PARAMETER
while the menu is displayed.
Return to previous menu
Default settings are underlined.
.
to enter the setting.