Sat Radio Receiver (Optional); Receiving Channels With The Sat Radio Receiver (Optional); Checking The Sat Radio Id Number - Alpine CDA-9886M Owner's Manual

SAT Radio Receiver
(Optional)
VIEW F/SETUP
':::>/ESC
SAT Receiver:
XM or SIRIUS Receiver
When an optional XM or SIRIUS Receiver Box is
connected via the Ai-NET bus, the following
operations may be performed. However, the XM
Receiver and SIRIUS Receiver cannot be
connected at the same time.
SIRIUS Receiver: Verify the features of the connected SIRIUS
Receiver Box. Not all SIRIUS Receivers have
identical functions and some may not be
performed on this unit. For details about functions,
refer to the SIRIUS Receiver's Owner's Manual.
Receiving Channels with the SAT Radio
Receiver (Optional)
About SAT Radio
Satellite Radio* is the next generation of audio entertainment, with over
100 digital audio channels. For a small monthly fee, subscribers can
hear crystal-dear music. sports, news and talk. coast-to-coast via
satellite. For more information, visit XM's website at
www.xmradio.com, or SIRIUS' website at www.sirius.com.
To receive SAT Radio, the separately sold XM Direct™ or SIRIUS
Satellite Radio Tuner and an appropriate Ai-NET Interface Adapter will
be required. For details, consult you nearest Alpine dealer.
*
XM and its corresponding logos are trademarks ofXM Satellite
Radio Inc.
*
SIRIUS and its corresponding logos are trademarks of SIRIUS
Satellite Radio InL
• The SAT Receiver controls on this unit are operative only when a SAT
Receiver is connected.
1
Press SOURCE/<!> to activate the SAT Radio mode.
2
Press BAND to select one of the three SAT Radio
Preset Bands.
Each press changes the band:
XM mode:
XM 1 ---+ XM 2 ---+ XM 3 ---+
SIRIUS mode:
SIRIUS 1 SIRIUS 2 ---+ SIRIUS 3
-7
22-EN
Preset buttons
(1 through 6)
XM 1
---+ SIRIUS 1
3
~ ~
Press or to select desired category.
~
4
Press or . . . to select the desired channel.
~
Holding down or . . . will change channels
continuously.
• When using the optional remote cOll/rol (RUE-4190, etc.),
Radio Channel can be directly called up with the numeric keypad
the remote control.
While in XM or SIRIUS Radio mode, enter the Channel
number you want to call up with the numeric keypad on
the remote control.
2 Press Enter on the remote control within 5 seconds to
receive the Channel.

Checking the SAT Radio ID Number

A unique Radio ID number is required to subscribe to SAT Radio
programming. Each third party XM or SIRIUS mdio comes with this number.
This number is an 8 character (for XM Radio) or 12 character (for
SIRIUS Radio) alphanumeric number. It is printed on a label found on
the SAT Receiver.
It can also be displayed on the screen of this unit in the tollowing way.
XM:
1
While receiving a SAT Radio band, press
. . . to select channel "0" for XM.
The unit alternately displays channel No. "0" for 2 seconds,
then the ID number is displayed.
Demonstration (page 21) becomes nonfunctional.
2
To cancel the 10 number display, select the channel
other than "0."
SIRIUS:
1
While receiving a SAT Radio band, press
. . . to select channel "255" for SIRIUS.
2
Press VIEW until the 10
Category Name
- -
- - -
---+
Channel NoJChannel Name
Calendar
---+
Clock
, - - - - - - , *
3
To cancel the number display, select the channel
10
to other than "255".
• You cannot use "0", "S", "/", 01' "F"for the ID Number (XM radio
Rece;"er 0111.11).
• You call check the ID number printed on a label on your third partv.
SAT Radio Receiver package.
*
When the "Text Scroll" (page 21) is set to "Alita," the display canllot
be switched by pressing VIEW The display contents switch
altema/ely.
SAT
1111
"t'
~
or
~
or
No. appears in the display.
(Blank)
- - - - -
-7
(Blank)
t-
j*
~N~._
10 No.
Category Name
Channel NoJChannel Name