Sat Radio Receiver (Optional); Receiving Channels With The Sat Radio Receiver (Optional); Checking The Sat Radio Id Number; Storing Channel Presets - Alpine CDA-105 Quick Reference Manual

SAT Radio Receiver
(Optional)
4
Press
~
or
~
to select the desired channel.
Holding down
~
or
~
will change channels
continuously.
• When using the optional remote control (RUE-4190, etc.),
{til
SAT
Radio Channel con be directly called up with the numeric keypad of
the remote COlltro!.
.... 1 ....
~
VIEW F/SETUP Preset buttons
(1 through 6)
To receive SAT Radio, the separately sold XM Direct™ or SIRIUS
Satellite Radio Tuner and an appropriate Ai-NET Interface Adapter will
be required. For details, consult you nearest Alpine dealer.
Checking the SAT Radio 10 Number
While in XM or SIRIUS Radio mode, enter the Channel
number you want to call up with the numeric keypad on
the remote control.
2 Press Enter on the remote control within 5 seconds to
receive the Channel.
If the channel number is 3 digits, the Channel is
automatically received after the channel number has
been input.
XM:
1
While receiving a SAT Radio band, press
~
or
~ to select channel "0" for XM.
The unit displays "CH
0"
for 5 seconds, then alternately
displays "RADIO 10" for 2 seconds and 10 number for 10
seconds.
While displaying "RADIO 10" as shown above,
Demonstration (page 17) become nonfunctional.
2
To cancel the 10 number display, select the channel
other than "0".
SIRIUS:
1
While receiving a SAT Radio band, press
~
or
~
to select channel "255" or "0" for SIRIUS.
2
Press VIEW until the 10 No. appears in the display.
CHANNEL NO.
--t
CATEGORY NAME
--t
CHANNEL NAME
-7
ID NO.
-7
ID NO.
-7
COMPOSER NAME
-7
CLOCK
--t
CHANNEL NO.
3
To cancel the 10 number display, set the channel to
other than "255" and "0".
• You cannot lise "0", "S", "/", or "F"for the JD Number (XM radio
Receiver only).
• You can check the JD IIl1mber printed on a label on your third party.
SAT Radio Receiver package.
A unique Radio ID number is required to subscribe to SAT Radio
programming. Each third party XM or SIRIUS radio comes with this number.
This number is an 8 character (for XM Radio) or 12 character (for
SIRIUS Radio) alphanumeric number. It is printed on a label found on
the SAT Receiver.
It can also be displayed on the screen of this unit in the following way.
~/ENT ~/ESC
~
BAND
~/II
Receiving Channels with the SAT Radio
Receiver (Optional)
About SAT Radio
Satellite Radio* is the next generation of audio entertainment, with over
100 digital audio channels. For a small monthly fee, subscribers can
hear crystal-clear music, sports, news and talk, coast-to-coast via
satellite. For more information, visit XM's website at
www.xmradio.com, or SIRIUS' website at www.sirius.com.
*
XM and its corresponding logos are trademarks of XM Satellite
Radio Inc.
*
SIRIUS and its corresponding logos are trademarks of SIRIUS
Satellite Radio Inc.
SAT Receiver: XM or SIRIUS Receiver
When an optional XM or SIRIUS Receiver Box is
connected via the Ai-NET bus, the following
operations may be performed. However, the XM
Receiver and SIRIUS Receiver cannot be
connected at the same time.
SIRIUS Receiver: Verify the features of the connected SIRIUS
Receiver Box. Not all SIRIUS Receivers have
identical functions and some may not be
performed on this unit. For details about functions,
refer to the SIRIUS Receiver's Owner's Manual.
SOURCEI<!) Rotary encoder
• The SAT Receiver colltrols on this unit are operative ollly whell a SAT
Receiver is connected.
1
Press SOURCEJ<!) to activate the SAT Radio mode.
2
Press
BAND
to select one of the three SAT Radio
Preset Bands.
Storing Channel Presets
1
Press BAND to select the desired band you want to
store.
Each press changes the band:
XM mode:
X1
--t
X2
--t
X3
--t
X1
SIRIUS mode:
S1
--t
S2
--t
S3
--t
S1
3
Press .... or
~
to select desired category.
2
After tuning in the desired channel, press and hold,
for at least 2 seconds, anyone of the preset
buttons (1 through 6) into which you wish to store
the channel.
The selected station is stored.
19-EN