Indicators And Projector Condition - Christie LX1200 User Manual

Appendix

Indicators and Projector Condition

Check the indicators for the projector condition.
The projector is operating normally .
WARNING
LAMP READY
red green
Fig .1 Filter replacement icon and "Please wait... "
• • • on
• • • dim
• • • off
72
Indicators
WARNING
SHUTTER
TEMP . FILTER
blue
red orange
✽ ✽
✽
✽
✽
✽
✽
✽
✽
✽
✽
• • • blinking at the normal rate
(approx. 1 second ON,
1 second OFF)
• • •blinking fast
(approx. 0.5 seconds ON,
0.5 seconds OFF)
Projector Condition
LAMP 1/2
REP .
orange
The projector is off. (The main On/Off switch is OFF
position or the AC power cord is unplugged.)
The projector is in stand-by mode. Press the ON/
✽
STAND-BY button to turn on the projector.
The projector is operating normally.
✽
(The Shutter is open)
The projector is operating normally.
✽
(The Shutter is closed)
The projector is preparing for stand-by or the
projection lamp is being cooled down. The projector
✽
cannot be turned on until cooling is completed and
the READY indicator lights green.
The projection lamp is being cooled down in the
✽
Power management mode.
The projector is in the Power management mode.
✽
The projection lamp is being cooled down in the
✽
Shutter management mode.
The projector is in the Shutter management mode.
Press the ON/STAND-BY button to turn on the
✽
projector.
✽
The filter is scrolled using the FILTER button on
the remote control or the Filter control function in
the setting menu. When the filter is being scrolled,
the Filter replacement icon and "Please wait... "
message (Fig. 1) appear on the screen.
• • • blinking slow
(approx. 2 seconds ON,
2 seconds OFF)
• • • Differs according to conditions.
✽
LX1200 User Manual
020-000430-01 Rev.1 (11-2011)