DRAINING WATER WITHOUT USING THE WATER TANK
You can use the dryer without using the water tank by following the procedures below.
CONNECTING THE DRAIN HOSE
The Dryer can pump the condensed water outside of the DRYER directly
with dain hose provide.
The procedures to connect the drain hose are as follows.
1. Disconnect the drain hose
2. Connect the drain hose
3. Connect accessory hose(long drain hose)
next to the hole that is connected to drain hose
•
When connecting hose
of the hose does not exceed 90cm.
CAUTION
•
After connecting the drain hose, you can directly drain
the condensed water via the drain-outlet through the
connected drain hose or through the washstand or
the drain-outlet of the washstand.
A
.
A
to the other hole.
B
to the hole
A
B
, take care that the height
B
.
installing your dryer _13
A
A