Draining Water Without Using The Water Tank; Connecting The Drain Hose - Samsung DV80F5E5HGW User Manual

Heat pump dryer
Table of Contents

Advertisement

Available languages

Available languages

DRAINING WATER WITHOUT USING THE WATER TANK

You can use the dryer without using the water tank by following the procedures below.
Install the drain hose so that water can be drained well.
-
Otherwise, the water may overfl ow and it may cause damage to the properties.

CONNECTING THE DRAIN HOSE

The Dryer can pump the condensed water outside of the DRYER directly
with dain hose provide.
The procedures to connect the drain hose are as follows.
1. Disconnect the drain hose
2. Connect the drain hose
3. Connect accessory hose(long drain hose)
next to the hole that is connected to drain hose
Because the dryer's drain pump can only pump up
the drain water to a 90 cm height, when you connect
CAUTION
the drain hose
the height of drain point does not exceed 90 cm.
A drainage error may occur if the drain point exceeds
90 cm. If a drainage error occurs, the control panel
displays an error code.
After connecting the drain hose, you can directly drain the condensed water via the
drain-outlet through the connected drain hose or through the washstand or the drain-
outlet of the washstand.
.
A
to the other hole.
A
B
B
to the drain point, make sure that
English - 13
to the hole
A
.
A
A
B

Advertisement

Table of Contents
loading

Table of Contents