JVC KW-ADV790 Instructions Manual page 55

@
Bluetooth (continued)
Selectable only for "Bluetooth PHONE."
*4
Only for the cellular phone connected for "Bluetooth PHONE." Not selectable when "New Device" is selected.
*5
Ifyou wish to receive more information about Bluetooth, visit the following JVC web site: <http://www.jvc-victor.
*U
co.jp/english/car/>
Selectable settings, [reference pagel
Only for the registered devices.
After selecting adevice from among the registered devices (IG? pages 27 and
28), establish the connection with it.
Only for the device being connected.
Disconnect the current device before connecting another device.
Only for the registered devices.
Delete the registered devices.
Selectable settings, [reference pagel
When the unit is turned on, the connection is established automatically
with...
Off:
No Bluetooth device.
Last:
The last connected Bluetooth device.
Order:
The available registered Bluetooth device found first.
Off: The unit does not answer the calls automatically. Answer the calls
manually.
On: The unit answers the incoming calls automatically.
Reject:
The unit rejects all incoming calls.
Auto: The unit informs you of the arrival of amessage by ringing and
displaying "Receiving Message." To read the message,
Manual:
The unit does not inform you of the arrival of amessage.
Adjust microphone volume connected to the Bluetooth adapter.
01/02/03
The Bluetooth software and hardware versions are shown.
55
Underlined
Initial:
page 30.
I@"
SETIINGS