JVC KW-ADV790 Instructions Manual page 51

Appears only when SIRIUS Satellite Radio is connected.
*4
Selectable settings, [reference pagel
Select the signal format emitted through the DIGITAL OUT (optical)
(~also
terminal. page 61)
PCM :
Select this when connecting an amplifier or adecoder
incompatible with Dolby Digital, DTS, or MPEG Audio, or when
connecting to arecording device.
Dolby D:
Select this when connecting an amplifier or adecoder
compatible with Dolby Digital.
Stream:
Select this when connecting an amplifier or adecoder
compatible with Dolby Digital, DTS, or MPEG Audio.
When playing back amulti-channel disc, this setting affects the signals
reproduced through the LINE OUT terminals.
Dolby SR :
Select this to enjoy multi-channel surround audio by
connecting an amplifier compatible with Dolby Surround.
Stereo: Normally select this.
You can enjoy apowerful sound at alow volume level while playing
Dolby Digital software.
Auto: Select to apply the effect to multi-channel encoded software.
On:
Select to always use this function.
Auto:
Increases the tuner selectivity to reduce interference noises
between adjacent stations. (Stereo effect may be lost.)
Wide:
Subject to the interference from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.
US: When using in North/Central/South America. FM/AM intervals are
a
set to 200 kHz/1 kHz.
Europe: When using in any other areas. FM/AM intervals are set to 50
kHz (100 kHz during auto search)/9 kHz.
SA:
When using in South American countries where FM interval is 100
kHz. AM interval is set to 10kHz.
Your SIRIUS identification number appears on the monitor.
51
Initial:
Underlined
SETIINGS