Using The Bluetooth Cellular Phone - JVC KW-ADV790 Instructions Manual

Using the Bluetooth cellular phone

Sound mode
(~page45)
The Bluetooth icon
lights up when
the adapter is
connected.
_ Buttons on the touch panel. In the
explanation, they are indicated inside
[
].
When acellular phone with audio function is connected,
*1
This adjustment does not affect the volume level ofthe other sources.
*2
•
Press [SOURCE], then press [Bluetooth PHONE].
•
• You can also use SOURCE on the monitor panel. Press it repeatedly.
Press [A'" MENU].
• •
• You can also use AV MENU on the monitor panel.
Press [Bluetooth].
Establish the connection with adevice, then make a call (or settings using <Bluetooth>
menu).
page 55
I&'
When acall CGlmes in•••
The source is changed to "Bluetooth PHONE"
automaticalIy.
Name and phone number (if acquired)
When <Auto Answer> is activated...
The unit answers the incoming call automatically.
55)
page
(I&'
(~cr:J
.JVC
~ page 31
Adjust the volume of the incoming calls.*2
[AV MENU] Hold: Activates <Voice Dialing> function
.[A T]
I
29
*1
Status of the device
Signal strength/Battery
remainder
(only when the information
comes from the device)
)
dE:7 0
I
Select the registered device
("New Device" appears when anew device can be registered.)
appears.
(~page
9)
When <Auto Answer> is deactivated•.•
To answer the incoming call
• Press any button on the monitor panel (except <9/1
IATT or +1-).
• Press the message displayed on the touch panel.
To end the call
• Hold any button on the monitor panel (except<9/1
IATT +1-).
or
• Hold the message displayed on the touch panel.
• You can adjust the microphone volume.
_
page 55)
(I&'
EXTERNAL DEVICES