Product Description; Installation - Kodak 3000DSV-E Operator's Manual

Product description

Installation

1-2
The Kodak 3000DSV-E Digital Scanner-Printer scans images and
outputs to the optional Video Laser Printer through a built-in PC
interface. The 3000DSV-E Scanner is ideal for medium-high volume
scanning of all formats of media from microfiche, jackets, aperture
cards, 16 and 35 mm roll film and 16 mm M and ANSI cartridges.
Placement of the unit in the environment described below will ensure
optimal performance throughout the long life of service for which it was
designed.
• A well-ventilated place.
• An area which is free from ammonia or other organic gases.
• A place which has easy access to a power wall socket-outlet so that
the unit may be easily plugged in and unplugged.
• Any area free from direct sunlight.
• A place which is out of the direct air stream of an air conditioner,
heater or ventilator and is not subject to extremely high or low
temperatures or humidity.
• A stable location with a flat surface that is not subject to undue
vibration.
• A place that is free from any object that would block the heat exhaust
duct of the printer.
• A place away from curtains or anything else that is easily flammable.
• An area that is safe from spilled water or other liquids.
• A dust-free location.
NOTE: If the scanner is located near a window, do not face the screen
towards the window.
A-61371 September 2004