Kodak 3000DSV-E Operator's Manual page 38

Using the Cycle Print
Mode
A-61371 September 2004
Centering
• Press the Centering/Fit key to turn on Centering.
Centering/Fit
NOTE: Centering/Fit mode cannot be used if Masking is selected.
Fit
• Press the Centering/Fit key to turn on Fit.
Centering/Fit
NOTE: Fit mode cannot be used when the scanner is connected to the
PC.
This function automatically scans the next image following a preset
period of time. Images are manually loaded on the carrier glass in
between cycles.
This is a system setting that must be entered by an Kodak Service
Representative.
If you want to use the Cycle Print Mode, ask your Kodak
Representative to make the necessary system setting, then you can
perform the following functions.
3-15